Carbon Steel P355NH Flange Manufacturer, Stockist, Supplier and Exporter in Mumbai, India – Unifit Metalloys Inc.
Unifit Metalloys Inc. is one of the top most Carbon Steel P355NH Flange Supplier in Mumbai, India. We here produce low cost EN 10028-3 Steel plate and sheet but use raw material from reputed manufacturer of P355NH Hot Rolled Fine Grained Steel Plates, EN 10025–6 P355NH Pressure Vessel Plates in Nigeria, Israel, Saudi Arabia, Qatar, Bahrain, Jordan, Mexico, Indonesia, Singapore, Thailand, and Malaysia.
Carbon Steel P355NH Flange are noted for their high performance and are designed to satisfy a variety of needs. Through a global network of stock-keeping branches, Unifit Metalloys Inc. is a major producer, supplier, and exporter of a broad range of Carbon Steel P355NH Flange. The benefit of purchasing material directly from the manufacturer is that you will receive authentic material, a proper test report, and a cost savings of at least 10-15%. In addition, the manufacturer will always stand behind the goods. We are not just a regular producer, but also a PED-approved one in India. Our plates and sheets have been put in a world-class pipeline.
EN 10025–6 P355NH Pressure Vessel Flanges, 1.0565 Flanges, EN 10028-3 Grade P355NH Normalized Steel Flanges Supplier in Mumbai India.
Our Company is known as one of the Largest Carbon Steel P355NH Flange Manufacturer in Mumbai, India. Carbon Steel P355NH Flange come in a variety of styles, including raised, flat, and BLRF faces, as well as orifice configurations. We manufacture DIN, BS, JIS, and GOST standards according to requirement of the customer. We can supply Carbon Steel P355NH Flange at best price as we are one of the largest supplier & trader of EN 10028-3 Gr. P355NH Steel Flanges in India.
Material Specification P355nh
| Material Specification Of : | P355NH Flanges |
|---|---|
| Flanges Standards | EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN |
| Pressure Rating | Class 150 To Class 2500 |
| High Temperature | Above 200°C (400°F) For Class 150 Or Above 400°C (750°F) |
| Low Temperature | Above -29 Degree C (−20°F) |
| Common Types Of Flanges: | Slip On (SORF), Weld Neck (WNRF), Blind (BLRF), Lap Joint (Loose), Threaded (NPT), Socket-Weld (SWRF) |
| Standard Cover : | pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing |
| Contact Faces | RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female) |
| Size Chart | Normal Pipe Size 1/2 to NPS 24″ |
| Thickness | Normal Pipe Size ≤ 18 |
| Bore Diameter | Normal Pipe ≤ 10 |
| Special Types Of Flanges : | Nipoflange, Elboflange, Latroflange, Swivel Flange, Expanding Flange, Reducing Flange, Weldoflange |
| Marking Standard | Name of Manufacturer Schedule Type of Flange Facing Nominal Pipe Size Pressure Class ASME B16 Designation |
| Bolt Type | high strength bolts medium strength bolts low strength bolts |
| European Standard Flanges | JIS B2220 Flanges (5k to 30k) and KS1503 flanges |
| Russian-Standard Flanges | GOST 12820 / 12821-80, DIN, UNI, EN 1092-1 |
| South African Standard Flanges | SANSflanges And SABS flanges |
| Surface Finish | smooth, concentric serrated, stock |
| Gaskets Types | Full Face Gasket Flat Ring Gasket Metallic Ring Gakset |
| Advantages Of Pipe Flange | Used to Connect Pipe System Easy Repair Pipe System Assembled Without Welding |
CS A105 Lap Joint Flanges Production Range
Carbon Steel P355NH Flanges Manufacturer
Carbon Steel P355NH Flanges Supplier
Carbon Steel P355NH Flange Chemical Composition
| Element | P355NH | P355NL1 | P355NL2 | Element | P355NH | P355NL1 | P355NL2 |
| Carbon (C) maximum |
0.18 | 0.18 | 0.18 | Silicon (Si) maximum |
0.50 | 0.50 | 0.50 |
| Manganese (Mn) | 1.10 to 1.70 | 1.10 to 1.70 | 1.10 to 1.70 | Phosphorous (P) maximum |
0.025 | 0.025 | 0.020 |
| Sulphur (S) maximum |
0.015 | 0.015 | 0.010 | Chromium (Cr) min. |
0.30 | 0.30 | 0.30 |
| Molybdenum (Mo) maximum |
0.08 | 0.08 | 0.08 | Nickel (Ni) maximum |
0.50 | 0.50 | 0.50 |
| Niobium (Nb) maximum |
0.05 | 0.05 | 0.05 | Titanium (Ti) maximum |
0.03 | 0.03 | 0.03 |
| Vanadium (V) maximum |
0.10 | 0.10 | 0.10 | Nitrogen (N) maximum |
0.012 | 0.012 | 0.012 |
| Aluminium (Al) maximum |
0.020 | 0.020 | 0.020 | Copper (Cu) maximum |
0.30 | 0.30 | 0.30 |
Mechanical Properties of Carbon Steel P355NH Flange
| Grade | Type | Thickness (millimeter) |
Yield Strength MPa (minimum) |
Tensile Strength MPa |
Elongation % (minimum) |
| P355 NH | Normalized | ≤16 | 355 | 490 to 630 | 21 |
| P355 NL1 | – | 16> to ≤40 | 345 | 490 to 630 | 21 |
| P355 NL2 | 40> to ≤60 | 335 | 490 to 630 | 21 | |
| – | – | 60> to ≤100 | 315 | 470 to 610 | 21 |
| – | – | 100> to ≤150 | 305 | 460 to 600 | 21 |
| – | – | 150> to ≤250 | 295 | 450 to 590 | 21 |
Carbon Steel P355NH Flange Dimension Chart
| NPS | O.D. of Flange | Flanges Thickness | Diameter of RF | Diameter of Hub at Base | Lengtd Tdru Hub | Bore or Diameter | Dia. of Hub at Bevel | Radius of Fillet | Deptd of Socket | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Welding (WN) Neck | Slip-On (SORF) Threaded (NPT) Socket (SWRF) | Lap Joint (Loose) | Slip-on (SORF) Socket (SWRF) | Lap Joint (Loose) | ||||||||
| O | Q | R | X | Y | Y | Y | W | B | H | r | Z | |
| 1/2 | 3-1/2 | 7/16 | 1-3/8 | 1-3/16 | 1-7/8 | 5/8 | 5/8 | .88 | .90 | .84 | 1/8 | 3/8 |
| 3/4 | 3-7/8 | 1/2 | 1-11/16 | 1-1/2 | 2-1/16 | 5/8 | 5/8 | 1.09 | 1.11 | 1.05 | 1/8 | 7/16 |
| 1 | 4-1/4 | 9/16 | 2 | 1-15/16 | 2-3/16 | 11/16 | 11/16 | 1.36 | 1.38 | 1.32 | 1/8 | 1/2 |
| 1-1/4 | 4-5/8 | 5/8 | 2-1/2 | 2-5/16 | 2-1/4 | 13/16 | 13/16 | 1.70 | 1.72 | 1.66 | 3/16 | 9/16 |
| 1-1/2 | 5 | 11/16 | 2-7/8 | 2-9/16 | 2-7/16 | 7/8 | 7/8 | 1.95 | 1.97 | 1.90 | 1/4 | 5/8 |
| 2 | 6 | 3/4 | 3-5/8 | 3-1/16 | 2-1/2 | 1 | 1 | 2.44 | 2.46 | 2.38 | 5/16 | 11/16 |
| 2-1/2 | 7 | 7/8 | 4-1/8 | 3-9/16 | 2-3/4 | 1-1/8 | 1-1/8 | 2.94 | 2.97 | 2.88 | 5/16 | 3/4 |
| 3 | 7-1/2 | 15/16 | 5 | 4-1/4 | 2-3/4 | 1-3/16 | 1-3/16 | 3.57 | 3.60 | 3.50 | 3/8 | 13/16 |
| 3-1/2 | 8-1/2 | 15/16 | 5-1/2 | 4-13/16 | 2-13/16 | 1-1/4 | 1-1/4 | 4.07 | 4.10 | 4.00 | 3/8 | 7/8 |
| 4 | 9 | 15/16 | 6-3/16 | 5-5/16 | 3 | 1-5/16 | 1-5/16 | 4.57 | 4.60 | 4.50 | 7/16 | 15/16 |
| 5 | 10 | 15/16 | 7.5/16 | 6-7/16 | 3-1/2 | 1-7/16 | 1-7/16 | 5.66 | 5.69 | 5.56 | 7/16 | 15/16 |
| 6 | 11 | 1 | 8-1/2 | 7-9/16 | 3-1/2 | 1-9/16 | 1-9/16 | 6.72 | 6.75 | 6.63 | 1/2 | 1-1/16 |
| 8 | 13-1/2 | 1-1/8 | 10-5/8 | 9-11/16 | 4 | 1-3/4 | 1-3/4 | 8.72 | 8.75 | 8.63 | 1/2 | 1-1/4 |
| 10 | 16 | 1-3/16 | 12-3/4 | 12 | 4 | 1-15/16 | 1-15/16 | 10.88 | 10.92 | 10.75 | 1/2 | 1-5/16 |
| 12 | 19 | 1-1/4 | 15 | 14-3/8 | 4-1/2 | 2-3/16 | 2-3/16 | 12.88 | 12.92 | 12.75 | 1/2 | 1-9/16 |
| 14 | 21 | 1-3/8 | 16-1/4 | 15-3/4 | 5 | 2-1/4 | 3-1/8 | 14.14 | 14.18 | 14.00 | 1/2 | 1-5/8 |
| 16 | 23-1/2 | 1-7/16 | 18-1/2 | 18 | 5 | 2-1/2 | 3-7/16 | 16.16 | 16.19 | 16.00 | 1/2 | 1-3/4 |
| 18 | 25 | 1-9/16 | 21 | 19-7/8 | 5-1/2 | 2-11/16 | 3-13/16 | 18.18 | 18.20 | 18.00 | 1/2 | 1-15/16 |
| 20 | 27-1/2 | 1-11/16 | 23 | 22 | 5-11/16 | 2-7/8 | 4-1/16 | 20.20 | 20.25 | 20.00 | 1/2 | 2-1/8 |
| 24 | 32 | 1-7/8 | 27-1/4 | 26-1/8 | 6 | 3-1/4 | 4-3/8 | 24.25 | 24.25 | 24.00 | 1/2 | 2-1/2 |
Carbon Steel P355NH Flange Weight Chart
| Nominal Pipe Sizes (NPS) | Slip On (SORF) | Threaded (NPT) | Socket Weld (SWRF) | Lap Joint (Loose) | Blind (BLRF) | Weld Neck (WRNR) |
|---|---|---|---|---|---|---|
| ½ | 1 | 1 | 2 | 1 | 2 | 2 |
| ¾ | 2 | 2 | 2 | 2 | 2 | 2 |
| 1 | 2 | 2 | 2 | 2 | 2 | 3 |
| 1¼ | 3 | 3 | 3 | 3 | 3 | 3 |
| 1½ | 3 | 3 | 3 | 3 | 4 | 4 |
| 2 | 5 | 5 | 5 | 5 | 5 | 6 |
| 2½ | 8 | 8 | 8 | 8 | 7 | 10 |
| 3 | 9 | 9 | 9 | 9 | 9 | 11.5 |
| 3½ | 11 | 12 | 11 | 11 | 13 | 12 |
| 4 | 13 | 13 | 13 | 13 | 17 | 16.5 |
| 5 | 15 | 15 | 15 | 15 | 20 | 21 |
| 6 | 19 | 19 | 19 | 19 | 27 | 26 |
| 8 | 30 | 30 | 30 | 30 | 47 | 42 |
| 10 | 43 | 43 | 43 | 43 | 70 | 54 |
| 12 | 64 | 64 | 64 | 64 | 123 | 88 |
| 14 | 90 | 90 | 90 | 105 | 140 | 114 |
| 16 | 106 | 98 | 98 | 140 | 180 | 140 |
| 18 | 130 | 130 | 130 | 160 | 220 | 165 |
| 20 | 165 | 165 | 165 | 195 | 285 | 197 |
| 22 | 185 | 185 | 185 | 245 | 355 | 225 |
| 24 | 220 | 220 | 220 | 275 | 430 | 268 |
Other Related Products
Carbon Steel P355NH Flange Supplier in the following cities
Unifit Metalloys Inc. is renowned & most acclaimed Distribution, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Fabricator, Stockist of Carbon Steel P355NH Flange. We are known as the Largest Suppliers of Carbon Steel P355NH Flange in Petaling Jaya, Jaipur, Navi Mumbai, Atyrau, Ho Chi Minh City, Jeddah, Secunderabad, Kanpur, Gurgaon, Bangkok, Indore, Rio de Janeiro, Montreal, Al Khobar, Riyadh, and London.
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
| Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
| Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
| Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
| Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | Kanpur |
| Thane | Bhopal | Sri City | Bareilly | Hosdurg | Pithampur |
Carbon Steel P355NH Flange Exporter in the following Countries
Unifit Metalloys Inc. is one of the topmost Carbon Steel P355NH Flange in Nigeria, Israel, Saudi Arabia, Qatar, Bahrain, Jordan, Mexico, Indonesia, Singapore, Thailand, and Malaysia.
| Nigeria | Israel | Saudi Arabia | Qatar | Bahrain |
| Jordan | Mexico | Indonesia | Singapore | Thailand |
| Malaysia | France | Canada | Venezuela | United Kingdom |
| United States | South Africa | Greece | Bangladesh | Turkey |
| Croatia | Sri Lanka | Australia | Brazil | Germany |
| France | Italy | South Korea | Poland | Belgium |
| Jordan | Denmark | Thailand | Kuwait | Oman |